Electrical Safety – Level-1 (Basic)

he objective of this workshop is to create awareness for personnel working at all levels; within a manufacturing facility. Topics covered in this course are:

Topics covered in this course are:

  • >> Basic Introduction and Terminologies
  • >> Importance and elements of Electrical system
  • >> Identification of Electrical Hazards
  • >> Consequences of Ignorance
  • >> Electrical Golden Rules

Electrical Safety – Level 2 (Advanced)

This course covers all elements of Electrical Safety Level 1. In addition to the above, it further focuses on how to conduct an electrical inspection, safety talks etc.

Topics covered in this course include:

  • >> Conducting Electrical Internal Assessments
  • >> Shop floor Assessments (Practical)

Advanced Electrical Safety (Advanced)

This course covers an advanced level of electrical safety with technical content that involves:

  • >> Conducting Electrical Internal Assessments
  • >> Electrical safety of 2 specific areas of the premises (customised)
  • >>Types of Safety Switchgears along with working principles
  • >>Electrical PPEs
  • >> Basics of Synchronisation Function
  • >> Basic knowledge of IR (Insulation Resistance) Test and Thermography
  • >> Shop floor Assessment (Practical)

Basic Earthing System (Basic)

This course is an introduction about earthing, it’s importance and consequences.

Key elements covered include:

  • >> Basic Introduction
  • >> Importance and elements of an Earthing system
  • >> Types of Earthing
  • >> Consequences of poor Earthing system
  • >> Equipment-specific requirement

Earthing System Level-1 (Advanced)

This course covers earthing requirement as per IS 3043 and NBC 2016

1. IS 3043
2. NBC 2016

  • >> Lightning Protection

Basic Preventive Maintenance (Basic)

This course covers the basics of preventive maintenance, types of maintenance and impact of poor maintenance on electrical equipment.

Key elements include:

  • >> Basic introduction and Terminologies
  • >> Importance and elements of Preventive Maintenance
  • >> Equipment- specific requirements
  • >> PM schedules and check-sheet (Any 2 equipment)
  • >> Consequences of a poor maintenance system

Preventive Maintenance of MV (Medium Voltage) Equipment (11 and 33 kV) (Advanced)

This course is technical and equipment based.

It covers detailed preventive and servicing requirements of equipment as per IS or IEC norms:

  • >> GO Switch
  • >> VCB / SF6 / OCB
  • >> Transformer
  • >> Power Cables

Preventive Maintenance of LT (Low Tension) System (Advanced)

This course is technical and equipment based.

It covers detailed preventive and servicing requirements of equipment as per IS or IEC norms:

  • >> LT panels
  • >> Capacitor Panel
  • >> DG sets
  • >> Distribution Board
  • >> Starter Panels
  • >> Electrical Pumps

Preventive Maintenance of UPS (Uninterrupted Power Supply) (Advanced)

This course is technical and equipment based. It covers detailed preventive and servicing requirements of UPS System as per IS or IEC norms

Preventive Maintenance of Fire and Life Safety Equipment (Advanced)

This course is technical and equipment based.

It covers detailed preventive and servicing requirements of equipment as per IS or NFPA norms:

  • >> Fire Extinguishers
  • >>Fire Hydrant System
  • >> Hose Box and Hose Reels
  • >> Smoke / Beam Detector System
  • >>Sprinkler System

Arc Flash Study + Surge Protection (Basic)

This course covers the basic of arc flash, how it is generated and it’s relevant consequences.

Topics covered include:

  • >> Basic introduction and Terminologies
  • >> Usage of Surge Protection Device (SPD) for different Electrical applications
  • >> Difference between short circuit, arc flash and arc blast
  • >> Consequences of occurrence
  • >> Arc Flash study and it’s importance
  • >> Why and where should Arc flash study be conducted

Relay Coordination Study (11 kV and 33kV) (Basic)

This course covers the basic of electrical protection system, how relays works and why it is required.

Topics include:

  • >> Basic introduction
  • >> Importance and elements
  • >> Different types of protection system
  • >> How protection systems work
  • >> Consequences of failing of protection system
  • >> Inspection schedule or testing requirement

Harmonics and Power Quality (Basic)

This module covers the basics of power quality, types of harmonics and effect on electrical equipment.

Topics include:

  • >> Basic introduction and Terminologies
  • >> Importance and elements
  • >> Different types harmonics
  • >> Impact of harmonics
  • >> How to control it
  • >> IEC requirements
  • >> Testing and Servicing
  • >> Transient Study
  • >> Power Wave, Dips and Swell

Electrical Installation requirement for Manufacturing Plants and it’s Office Areas (Advanced)

This is technical topic that covers Section-2 electrical installation requirement, in manufacturing plants, as per NBC 2005 and 2016:

  • >> Section-2; NBC codes
  • >> Factory Act 1948

Electrical Installation requirement in Flammable Areas

This technical course covers the Section-2 electrical installation requirement, in manufacturing plants, as per NBC 2005 and 2016.

Classification of Flammable material Requirements of: 

  • >> Section-2; NBC codes
  • >> Factory Act 1948
  • >> NFPA codes

Shutdown Planning & Electrical Maintenance

This training creates safety awareness during maintenance that continually focuses on man and machine safety. Key Elements of this

training are:

  • >> Maintenance objectives
  • >> Types & Necessity of Maintenance
  • >> Tools for Maintenance Planning
  • >> Planning & Scheduling for Shutdown
  • >> Productive maintenance practices
  • >> Maintenance safety
  • >> Safety Management System
  • >> Role of Maintenance in Energy Savings

Electrical Installation requirement for Corporate Buildings (Advanced)

This technical topic covers the section-2, electrical installation requirement, in corporate buildings, as per NBC 2005 and 2016.

Requirements of:

  • >> Section-2; NBC codes
  • >> Factory Act 1948
  • >> NFPA codes
TOP